Re: s1200BTL led de exclamação fica acesso
What color is the LED? Green, yellow, or blue? Is it solid, or blinking? You can find the LED decoder and information in the TPS at Server Products — Technical Product Specification
View ArticleRe: MFSYS25 - Does anyone know the procedure to swap a drive in the MFSYS25...
Assuming the disk is part of an existing RAID, you can use the Mark Offline option, remove it, and put in the replacement without having to bring down anything.
View ArticleRe: MFSYS25 Switch module problem
If you have two switches, and haven't done this already, down the administrative link between them:From the CMM GUI, choose System | Switches | Advanced ConfigurationMouse over any port and choose Port...
View ArticleRe: Motherboard S1200KPR and Celeron G1610
For both the board and the processor, you can click on COMPATIBLE PRODUCTS to see a complete list of what will work. Neither product lists the other as compatible, so that is not a supported combination.
View ArticleRe: NETIO.SYS error, who to fix?
I see you have also opened the same thread on the Dell support forums. That is your best bet for getting an answer. Have you already verified that your system supports that OS, and have you already...
View ArticleRe: Problem 10GB AXX10GBTWLIOM and RMS25CB080, R2308GZ4GL
I haven't seen such a problem before. Do you have another OS you can install as a test, to see if the hardware itself is functional?
View ArticleRe: Problems getting LCD to work with Galileo
I finally was able to build the 0.8 firmware and the init statement is still needed in order to get my LCD to work. Also in the Linux console window, when the sketch starts I see LOTS of "trace error...
View ArticleRe: NETIO.SYS error, who to fix?
Hello, Yes, i open a thread in DELL support to seek more help, but so far any response! I updated all drivers and could not solve the problem. I think the conflict is in the network adapters that are...
View ArticleHD 4000 Will not update. 8.1 problems
I have an Asus X502CA Laptop with windows 8.1(64 bit)It has the standard 10.18.10.3308 driver installed for my Intel HD Graphics 4000. I downloaded the new 10.18.10.3316 driver, but when I try to...
View ArticleClik here to view.
Re: Sporadic but recurring connection dropouts on an Intel 6235 wireless adapter
Well, I came home to another dropout today. In fact, I think it occurred only hour after I installed the latest driver (the previous night) and I just did not notice it (the rest of my family did -...
View ArticleRe: New D54250WYK HDMI display dropping out
This is probably related to the LPSP issue Lois spoke about. Intel needs to update the BIOS as well as the graphics drivers to resolve these HDMI handshake negotiation issues that is causing issues...
View ArticleRe: Screen Resolution a bit off........
In my experience with DLP displays it always needed overscan correction. Since I have not connected the NUC to such a display yet, check the Intel Graphics properties to see if there is anything there...
View ArticleRe: Windows* 7 Driver (32-bit) - Version 1091 - Intel® GMA 3600
I tried out the newest 1096 driver, and I came out mostly unimpressed. There have been a few performance improvements in older DirectX games. Tony Hawk's Pro Skater 2 is now playable in hardware mode,...
View ArticleRe: PTV 2000 not working after upgrading to Win 8.1
Hi, win8.1 uses Miracast for wireless display, you can try updating to the latest graphics driver. more details on the requirement can be found in this link:...
View ArticleIntel HD Graphics 4000 and Ubuntu 13.10 x64
Hello, I have X1 Carbon Touch with Intel HD Graphics 4000 integrated and with Ubuntu 13.10 x64 installed. A bunch of random bars and colors sometimes appears on screen. Does anyone have the same...
View ArticleRe: Screen Resolution a bit off........
thanks for that link louie........... unfortunatly i go into my screen settings and ONLY have the option for 1080 or 720. it wont even give any other options for sizes. and i have the latest drivers...
View ArticleClik here to view.
DC32171YE problem no connector for internal power
Hi I bought one of these and it is intended for my robot project. I finally got around to doing some work on the computer side (NUC) and am frustrated to see that my mainboard shows only two holes...
View ArticleHow to get SD card to initialize?
When I try to get the SD card to work on the Galileo I can not get the SD.begin() statement to work. Using IDE 1.5.3 I have upgraded the card's firmware and also confirmed that the SD card works by...
View ArticleRe: WiDi on Win 8.1 with HD3000 & 7260
I already had this installed so when I installed wireless_16.6.0_e164.exe from your link it asked me if I wanted to repair the existing install which I agreed to. I then tried to install WiDi...
View Article