Clik here to view.
Re: orsair Dominator Platinum CMD32GX3M4A1866C10 Kit not working on Intel DH87MC
Thanks for your guidance. However, after updating bios, the ram kit is now working perfectly and at 1600 MHz on DH87MC. Issue is no longer an issue
View ArticleRe: Stock Or Aftermarket Heatsink For i7-4771
For what it is worth, I have an i7-4771 and asked a similar question here:https://communities.intel.com/thread/44948 Doc.
View ArticleRe: Problems building the 8.0 firmware
Sure. Feel free to report any problems and I'll be glad to help fixing them :-) It turns out to be quite a good way to learn Galileo and Yocto internals, I enjoyed yesterday's Ubuntu 13.10...
View ArticleClik here to view.
Re: Stock Or Aftermarket Heatsink For i7-4771
Thanks Doc. Hopefully a few others will chime in. Also, there's another guy with your user name on an outdoor-related website that I am a member of. Could it possibly be you? JK By the way, how are...
View ArticleRe: Samsung Series 7 slate and Windows 8.1
I do not know what Intel® WiDi software version you are using; however, it seems you are still using the older Intel® wireless driver from Windows* 7/8.At this time there is no Windows* 8.1 compatible...
View ArticleRe: Samsung Series 7 slate and Windows 8.1
Well that puts an end to that. Thanks for the info. Does Intel plan on releasing an 8.1 compatible 3000 driver?
View ArticleRe: Stock Or Aftermarket Heatsink For i7-4771
Not on any outdoor sites that I know of. The i7-4771 is the best processor I have had. I was skeptical about the fan solution, but it is also working very well. And, here is a link to a video which is...
View ArticleClik here to view.
No audio from headphone jack on NUC kit D54250WYK, Windows 7 Pro 64-bit,...
Problem description No audio from headphone jack on NUC kit D54250WYK, Windows 7 Pro 64-bit, drivers from support link won't load. · Exact symptoms; error messages; steps leading up to the...
View ArticleRe: Is wireless centrino n-2230 still getting an update?
The answer is: yes, we are working on it.An update will be released soon and we are still working on other issues that have not been solved yet.
View ArticleRe: Problems building the 8.0 firmware
"arguments list too long" - I'm not 100% sure, but that rings a bell. I think it's caused by too long paths involved into building. Try renaming the intermediate dir I see there...
View ArticleRe: WiDi on Win 8.1 with HD3000 & 7260
Did you install the Intel® Proset Software? Please verify; otherwise download the full version (larger file size) here: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23389If you the issue...
View ArticleRe: Hello, how much faster is an i7 from an i5 and i3 running at the same...
Since you are not asking for a specific model number it is hard for us to make the comparison. The following link is comparing an I7, I5 and I3 processor. All of them are Ivy Bridge...
View ArticleRe: Trying to use mPCIe Centrino WiFi with Galileo board
Hi Gman Just to make sure - you're mentioning "little linux image" in your post, but the file with "little" in its name in the downloads section is intended for FW upgrade only. For Wi-Fi support you...
View ArticleRe: Samsung Series 7 slate and Windows 8.1
The Intel® HD Graphics driver version you have is good for Windows* 8.1. I was referring to the wireless driver, which remains to be released but I do not have an official date yet.
View ArticleRe: Problem uploading sketches.
I've faced something like this only once or twice so far and what worked for me was pressing the sketch Reset button on the board (not the Reboot one).
View ArticleRe: Does the Galileo board support automatic power selection or PWR_SEL...
Thanks for sharing! Alternative could probably be an auto-shutdown watchdog, which would power down the board after battery pack gets below certain voltage.
View ArticleRe: chipset 602 raid drivers not found
Claudio, There are two "types" of embedded RAID on your Z9PE-D16. Either LSI MegaRAID or Intel Rapid Storage Technology enterprise. Obviously there are different drivers for each of these. I believe...
View Article