Re: How do I verify Quick Sync is working?
I turned on the onboard GPU in the BIOS, and then installed the latest video drivers for my CPU's GPU. Then after booting I let the system create a faux monitor for a third monitor, with that monitor...
View ArticleRe: Windows 10 Enterprise Preview
Hi CStarr, Currenlty Intel PROSet software does not support Windows 10. You may try disable and re-enable the VLAN interface see if this could be of some help. I understand...
View ArticleGalileo 2 not showing in Control Panel
Hoping to get some advice here. I have a Galileo 2 that I picked up at an Intel/Wind River IoT boot camp In chicago. The device worked fine there. When I connect it to my PC via USB it does not show...
View ArticleRe: Intel Edison - not able to read GPS input from /dev/ttyMFD1 using node.js
Hello Experts, Please help, can someone run the code to see if it is an issue with my Edison unit. Regards, Virender
View ArticleBluetooth Error
I can't figure out how to fix this error : [bluetooth]# discoverable onFailed to set discoverable on: org.freedesktop.DBus.Error.NoReply Thank you !
View ArticleRe: D54250WYK Windows 8.1 low memory error
Really happy to stumble across this thread, as this has been getting really annoying lately. I feel foolish for not noticing it was happening every time the hdmi input was turned 'off'. Just installed...
View ArticleRe: External Power adaptor for Intel Edison breakout board
Hi Alen, Since the document does not mention about the supported Ampere range so we have the following query. We have following three different external power adaptors with different voltage and...
View ArticleExtended display not there for dual monitors
Hello, I just bought a new monitor so I could have an extended display. The problem is the option is not there. I have tired changing some settings in the Intel Graphic and Media Control Panel under...
View ArticleRe: Extended display not there for dual monitors
BTW, graphic product is Intel®HDGraphics2000
View ArticleRe: How best proceed with overheating i7-4790K?
If it were me, I would adjust offset settings before touching vcore. You should technically have it at 44, 44, 43, 42, which is "true" stock as having all cores set at 44 is in essence "overclocking",...
View Articlehi..
I have a problem in installing graphics media accelerator it shows "the computer does not meet the minimum requirements to install this software" what shall I do for that.......I have intel G3220 i3...
View ArticleRe: WiDi Connection Dropped after 10 minutes
Intel (R) Dual Band Wireless-AC 7260 17.13.11.5 (08-Dec-14)Intel (R) HD Graphics Family 10.18.14.4080 (05-Jan-15)Sony KDL-46W900A Software version PKG4.491GAA
View ArticleIntel edison arduino analogRead()
If I use arduino uno or due, analogRead() function takes time about 0.1ms ( and it is presented in arduino homepage ) But if i use Intel edison arduino, analogRead() function takes time about...
View ArticleRe: How best proceed with overheating i7-4790K?
Can you post a picture of this 98% power limit throttle? I want to see what else is going on when this is happening. One small confusion: Default with XMPCore volt 1.262TDP 126WTemp 84*CScore 1106...
View ArticleRe: DE3815TYKHE BIOS UPDATE 36 to 41 fails
Hello, thanks. I tried to flush 37 out from an running System: reboot - F7 - prepare - fail. Then I tried the same with an power off cycle the same.Then I took an other device an connected just...
View ArticleRe: Edison and VTuneAmplifier2015 Remote Linux
Hi Taimoor, For Intel Energy Profiler, you may refer to the document in the intel system studio target package. For example, in the Intel system studio/Target/ folder, extract...
View ArticleRe: DZ68BC Graphics Driver question
Thanks for joining the Desktop Board community. The latest Intel(R) Graphics Driver would be version 3517This is available here:32 bit Intel® Download Center 64 bit Intel® Download Center Allan.
View ArticleRe: Intel i7 chipset problematic with Windows 8.1
Thanks for your help Joe. I tried both those actions without success. HP has now contacted me and requested me to return the computer to their service department. I will do that because nothing else...
View Article