Re: How best proceed with overheating i7-4790K?
I am having the same issue. I have the 4790k in the GA-Z97X-Gaming 5. Occt fails immediately due to the heat of the processor. I am not an over clocker and have it all stock. I have updated the bios of...
View ArticleRe: How best proceed with overheating i7-4790K?
My batch is L421B951as well. Hope it helps. I would like a solution to this issue. My processor is not even a month old.
View ArticleRe: Firmware Edison IoT Edition
After trying to do a wget to my host, I realize you are correct. I cannot do any wget's from my Edison. However, I just did some test wget's from two other Linux computers on my same home network OK,...
View ArticleClik here to view.
problem with processor diagnostic tool
Hello, i have a problem with processor diagnostic tool ( front side bus unsuported , QPI unsuported and IGD detection test not found ect ...) ------------------------------ Testing Processor 1...
View ArticleClik here to view.
Re: ubilinux (Debian) now available from Emutex Labs
Thanks faceplant. That solved this issue although I get a segmentation fault with the blink example.
View ArticleRe: Intel AC7260 problems
Shadow, I can certainly tell you that you do NOT need an AC router to use this card. I'm having issues with it too with an AC router. Just wanted to help clarify that for you.
View ArticleClik here to view.
Re: Support for the Adafruit 2.8" TFT display for Arduino Edison
Sort of an FYI and question: For the fun of it I picked up a Galileo Gen 2 to see how will it performs. I plugged in the Adafruit 2.8" display using my updated driver and tried out the graphic test...
View ArticleRe: How can i improve SPI speed?
So a couple of days ago I received my Galileo 2, I have been playing around with my Adafruit_ILI9341 library and it works, but I am finding the SPI clock speed to be something like: 39us or about...
View ArticleDE3815TYBE Custom Solutions Header
Hello, I intend to deploy a DE3815TYBE NUC and add a HDMI-CEC adapter using the custom solutions header (https://www.pulse-eight.com/store/products/117-internal-hdmi-cec-adapter.aspx)According to the...
View ArticleRe: How to remove softblocks on Edison w/ Breakout board
An update for those looking at the unknown soft blocks blocking their wlan0 from working. I eventually unseated and reseated the Edison Module to the mini breakout board. On rebooting the Edison, the...
View ArticleClik here to view.
Re: i7 4790K temperatures
Seems to pass fine. Lower temperature than even the XTU test. According to HWMonitor, the max package power is around 60W for your ITT, while for the XTU it's around 80-90W. When you run the small...
View ArticleRe: Is the "gray NUC" (Celeron version) compatible with Windows Server 2012...
I would like to state what I did following your example as it didn't quite turn out right with your directions, maybe from the age of it. But I have a DCCP847DYE NUC and installed it in "classic mode"...
View ArticleRe: Error when i play arma 3, need to know how to downgrade driver.
I'm having the same problem man and it's a pain, I don't know how to do this I just want to play the game! we need help please! anyone!
View ArticleRe: next step: Bluetooth Low Energy and SensorTag - running!
Thanks Fab-Lab! After opkg update, I needed to run opkg install bluez5-dev to get noble installed (Otherwise I get bluetooth Header file errors).
View ArticleClik here to view.
I have just bought a DN2820FYKH and it will not boot at all
I have just bought a DN2820FYKH and i can not get it to boot into the bios or anything. I have tried four different TV's and 4 different monitors as well as 6 different HDMI cables. I have tried...
View ArticleRe: How best proceed with overheating i7-4790K?
To all who use IntelThermalTest and their tests being passed and under Prime95 it's failed Can you please check, and re-run IntelThermalTest, and check in task manager (Ctrl+Shift+Esc) what CPU Load...
View ArticleRe: i7 4790K temperatures
To all who use IntelThermalTest and their tests being passed and under Prime95 it's failed Can you please check, and re-run IntelThermalTest, and check in task manager (Ctrl+Shift+Esc) what CPU Load...
View ArticleRe: "flashall.sh" in Release 1 Maintenance WW42
I guess the validation of the release was too far on to include the change.
View ArticleRe: i7 4790K temperatures
Could you please put another link for the thermal test? The one you posted doesn't seem to work anymore and i deleted the program. Thank you!
View Article