Intel HD 630 Will Not Detect 3rd Monitor
I have a Dell OptiPlex 5050, and it supports 3 displays. I have already determined that all the displays work through both display ports, so all three will detect. However when i connect the monitor to...
View ArticleRe: Intel HD 630 Will Not Detect 3rd Monitor
The use of adapters, like your hdmi to vga cable, is not supported. That said, try a different (or better) adapter. For example, I am using this one: Inland HDMI Male to VGA Female Adapter w/ -...
View ArticleRe: Error Enabling Optane
Sorry for not responding or a while. I have been in college so i haven't had much time to go on my pc. But i will follow the ※Installing OptaneMemory on RAID mode OS and see if that helps. I will get...
View ArticleRe: Training data with caffe and python in Colfax (terminal): Do you have an...
Hi Cosma,Could you please clarify on below queries - 1. Is the Makefile that you shared same as that you used to create lmdb. Because there are sudo commands and the caffe path is pointing to...
View ArticleRe: Intel Optane: When I disable CSM Support my pc won't open windows
Hey Diego, So I am about to reinstall windows but Disk 0's partition style seems to be Master Boot Record (MBR), and I am unable to click the option to change it to GPT Hope you can help. Regards,Floris
View ArticleRe: depth image and color image
I've tried the methods mentioned here, I will extract color images and depth images in MATLAB to see if the number of them is consistent.And I will try the method of RealSense developer...
View ArticleRe: Noise in Realsense D435 pointcloud
Thank you for your fast reply!But I am not so convinced, the bigger spots in the video are definitely too large for insects. Also the drone causes quite some air movement, soI don't think there are any...
View ArticleRe: Software Trigger for Realsense D435
Hardware depth synchronization for D435 was added in the current 5.10.3 firmware version. The D435 cannot do color sync though.
View ArticleRe: NUC8i7HNK can't load BIOS after Secure Boot enable
1. Still I did not understand you. You can boot into Windows and you see video output in Windows? Or, you can't boot into Windows neither and you see always black screen?2. If you in all cases don't...
View ArticleRe: NUC5i5RYH no boot after win 10 install
1. Enter Bios settings by pressing F2 during boot. In bios, press F9(followed by "Y"), in order to set bios to default settings. Press F10 (confirmed by "Y", to save setting and exit. Wait 30 seconds...
View ArticleRe: Noise in Realsense D435 pointcloud
Given how bright the sunlight is in the recording, it may be worth reviewing the outdoor sunlight section of Intel's camera tuning guidelines. Left-click on the image below to view in full size....
View ArticleRe: Problem with the AC-7260 constantly disconnecting AC speed not availble
Hi Team, I'm an IT engineer in NZ, and I have just spent a good part of 2 or so weeks looking into this in my spare time, as my personal laptop suffered the same issue after updates from good ol MS....
View ArticleRe: HD 620 HDMI Problem
Hello everyone, I see most users here are reporting that with driver 15.60.2.4901 they can get their laptops working fine with external displays through HDMI.You should check your laptop manufacturer's...
View ArticleRe: Problem with the Realsense SDK 2.0 and OpenCV
Hello Honk5000,Thank you for your interest in the Intel RealSense D435 camera. The problem we have noticed is that the source Mat and the destination Mat are the samecv::cvtColor(image, image,...
View ArticleRe: Second M.2 interface does not show up in bios
Hello JustinGrimm,Thank you for your response.In this case, what Scott P. stated is correct.For the M.2 2230 module connector (Key Type-E), Intel only supports Wireless cards/modules as it is specified...
View ArticleRe: Wi-fi range issues after Windows 10 update
Thanks, I've attached the report. To answer your questions:- No other system is experiencing the problem, we have other PCs, Macs, Android phones and tablets all working fine with Wi-fi- the PC acts...
View ArticleBSOD Windows 7 SP1 x64
BSOD on Resume from Standby on Windows 7 SP1 x64 with latest driver 10.18.10.4885. Windows 7 was only installed on 30/08/2018 so it is only 3 weeks old.Video Bios: 2132.0 A desktop AC powered PC....
View ArticleRe: Compatibility issue of HD 630 & driver
hello ~ ty for reply..i tried to OEM grahpis version but.. it not work.. make black screen in asrock site[Beta] VGA driver ver:15.60.4849 and VGA driver ver:21.20.16.4542 do not working... i dont...
View ArticleRe: Training data with caffe and python in Colfax (terminal): Do you have an...
Hi Deepthi,I tried to execute the solver (myapplication2.py previously attached) using the train_val.prototxt file saved in my caffe_path.The error now is: [...]I0919 07:48:29.793191 150110...
View Article