Re: NUC Haswell reboots after shutdown
Hi DCrypt, The beta bios only resolve the issue of the powercircle when you shut down the nuc with WOL enabled.Before this bios, you needed to disable WOL to get your nuc shutdown and stay off. Now,...
View ArticleRe: Is there any gps breakout board or shield that work with intel galileo ?
Hi again, I have now managed to hook up a GPS module to the Galileo board and get some meaningful data out of it with minimal code changes. I have connected the GPS UART pins to Arduino Pin 0 and Pin 1...
View ArticleRe: Galileo Debian v1.1 image
The cy8c9540a driver is available, but id does need to be loaded manually using modprobe. Once loaded, however, it does not seem to make any difference. I also noted that even when booted into the...
View ArticleRe: Galileo Debian v1.1 image
No error messages with dmesg after the modprobe? The plot thickens...I seem to remember that you needed to set the i2c clock speed to 100kHz with a module parameter, but I'm not sure off the top of my...
View ArticleClik here to view.
DN2820FYKH no HDMI output on initial boot
Brand new device, installed ram and ssd. Device powers on, but not getting a picture on my tv. Checked hdmi cable, which is working fine. TV can see something (as hdmi input is active) but can't...
View ArticleRe: dn2820fykh - DTS HD
Hi miz786, Do you have a 32-bit or 64-bit version of Windows 7? I hope it's 64-bit, as there are not any Intel graphics drivers available for Windows7 32-bit, unfortunately. If you are using 64-bit,...
View ArticleRe: D34010WYK Auto Shut-off when TV/Receiver Turns Off
I have the same problem nuc d34010wyk stops working when i close av receiver and tvonkyo HT-R380 and Samsung TVCouldent under stand why i dident have network Connection to the Nuc, tv whas only...
View ArticleNUC d34010wyk stops working when i close AV-receiver and TV
nuc d34010wyk stops working when i close av-receiver and tvonkyo HT-R380 and Samsung TVCouldent under stand why i dident have network Connection to the Nuc, tv whas only of!!!!!!!!!so i did a test...
View ArticleRe: HDMI vs Displayport Display type detection
Is this really this much of a mystery???? Anyone.....
View ArticleRe: Widi & Windows 8.1 problems
can you pls share a link for working driver or upload it for me somewhere like dropbox
View ArticleRe: What do INF files do?
Thanks Joe, Yes it's really just regarding chipset INF files. The Intel® Chipset Device Software (INF Update Utility) says that it - "The Intel(R) Chipset Device Software installs Windows*INF files to...
View ArticleRe: Intel Centrino Wireless-N 2230, not connecting, connecting with limited...
I've been able to test this on various other networks. It worked on all, but none of them had n enabled. Disabling n in adapter solved the issue for about a week after which porblem came back. Tried...
View ArticlePC No longer wakes up from S5 state on timer
Hi All, For several months my PC was powering-up in the wee small hours in order to perform system maintenance tasks. It achieved this via the BIOS setting which powers-up the PC as a specified time....
View ArticleRe: Intel AC7260 limited access after sleep
There are new requirements for PMs after the recent Jive update to Intel® Communities last week.Please add me as friend or accept the request so we can get the necessary information.
View ArticleClik here to view.
Re: 10Gbps Thunderbolt networking for Windows 8.1 driver update? When?
Thanks for the link. I read the release notes, but there doesn't seem to be any mention of Thunderbolt networking. Which mobo are you using?
View ArticleRe: 10Gbps Thunderbolt networking for Windows 8.1 driver update? When?
My board is a DZ87KLT-75K. Doc
View ArticleDN2820FYK PXE Booting
I just wanted to quickly relate my experiences with PXE booting in case they can help anyone. I use SYSLINUX (pxelinux) to point to the system images. Most of my PXE images place the root file system...
View ArticleRe: clloader in a Linux Base Image (clanton-full) build not working?
Hi Liam, I understand you are using ssh/scp now so you don't really care any longer. Still wanted to comment on Arduino IDE eglibc toolchain on Windows. Maybe still of interest for someone. Below steps...
View Articleopencv versus toolchain versus yocto
First of all, let me tell you guys something.. this yocto build that takes hours, dependence of internet connection, a bunch of package that must be pre-installed in the desktop, and a lot of...
View Article