Re: RAID1 Failed: One of the harddisk broken then replace a new one, but...
I tried Intel Matrix Storage Manager 8.7 and 8.9, it said Volume0 on port 0 disk was missing, and there is a new no-raid hard disk, then set the new disk to raid disk, but still cannot resolve the...
View ArticleCan I uninstall Intel Rapid Storage Technology?
Hi, I'm using Windows 8.1 x64. My laptop is a Lenovo Y510P with 1TB HDD and a SSD of 24GB in the M.2 NGFF interface for caching. Since my laptop uses Expresscache to manage the SSD, and not IRST... Do...
View ArticleRe: NUC HTPC Sound issues
D54250, BIOS 24, Windows 7 64-bit, .3540 Beta driver. Mini HDMI goes to Vizio TV as monitor/speakers. Crashes with the 3b c0000094 bugcheck if I unplug the mini HDMI.
View ArticleRe: How to connect wifi if there is no passphrase for the SSID
Where should i specify the security key of the SSID?
View ArticleNuc i5 Haswell (D54250WYK) Strange fan noise
Hi I've recently (for Christmas) bought the Nuc i5 Haswell (BOXD54250WYK), and after few weeks, the fan began to make some strange noise, like a trimmer running on low battery, or something like that...
View ArticleRe: NUC HTPC Sound issues
lhill ,Can you comment on whether or not this driver will be available to non nuc haswell rigs? And if so when?Thanks
View ArticleRe: Intel Smart Response Acceleration not available to all drives
Thanks for your help. I'd really like to figure this out as the 2TB drive is where I keep most my data (just not the OS), and the other drives that I can accelerate are a lot slower.-Please let me know...
View ArticleClik here to view.
Re: Problem HDCP DC3217IYE
Well, looks like i solved it. Had it connected with a short hdmi cable, swapped to a longer one and now it's working! Pretty strange, what could be the reason for this?
View ArticleRe: Hello, I have a question about intel i3 generation upgradation!!!
but when I try to update BIOS it fails.... can you please tell me why this was happen??
View ArticleRe: server 2600cp2 is not starting
HiYou mean problem in its motherboard.Can you please tell me the actual reason because its my client server he is asking for exact problem??
View ArticleRe: server 2600cp2 is not starting
It's one of the steps to isolate the problem. Since you confirmed both CPU and memory work on another board, then it's likely the board is the cause. But I sorry can't tell you why the board failed.
View ArticlePROGMEM in intel galileo
im trying to use PROGMEM in intel galileo. same example like this Arduino - PROGMEM i also included galileo-Pgmspace.h/pgmspace.h at master · mikalhart/galileo-Pgmspace.h · GitHub fot the library in...
View Articlei7 S & T power
Do the S & T version i7's run at lower voltages at all? or are the lower wattage processors just clocked differently and that's it?
View ArticleRe: Intel AC7260 problems
hmm i just pinged the router and there are big ping spikes of 250ms with intel dual band ac 7260 every 5 mins at 5 Ghz band. i guess intel needs to fix this. the minimum ping with other laptops is...
View ArticleClik here to view.
Re: Intel AC7260 problems
5 minutes is 300 seconds so I just did a ping test and I got 2 ms as the max ping and 0 ms average with 300 times ping to router. I don't turn off my "desktop replacement" (doesn't even have the 1/3...
View ArticleRe: PROGMEM in intel galileo
The Galileo Quark is an Intel 486 processor. There is no equivalent to the PROGMEM flash memory on an Atmel processor.Any version of avr/pgmspace.h for the Galileo is just a dummy file so sketches will...
View ArticleRe: Makefile Capsule Error
zijue@(13:11:49):~/labfiles/sysimage_v0.7.5/sysimage.CP-8M-release$ BASETOOLS=~/src/edk2/BaseTools/Source/C/bin/zijue@(13:12:18):~/labfiles/sysimage_v0.7.5/sysimage.CP-8M-release$...
View ArticleRe: Intel Galileo serial port(audio jack) lags?
I think the problem is not in the cable.Though I am not using the same cable with you, I can tell you how I check the cable and board:1. Cable check:Connect 3.5mm to rs232, and rs232 to usb, and usb to...
View ArticleRe: Makefile Capsule Error
Well that looks a lot better.. BASETOOLS sets the location of where Makefile finds executables. Verify you can CD to that directory from where you are.I don't know what else could be wrong, unless...
View Article