Application Running On Powerup
How do I set an application to run automatically once the Edison is powered up?
View ArticleRe: 3-Display Issues with HD Graphics 4000 Laptop (HDMI & VGA Config)
Anything yet Sylvia_intel? Let me know if you need anything else to figure this out. Thanks
View ArticleHow to make CUPS a JetDirect/AppSocket print server?
I have a Gen1 Galileo board and I use a minimal Debian image that I created with debootstrapCUPS package is already setup and running on the Galileo Here are the steps I've done so far: 1. Add the...
View ArticleRe: IoT developer kit (beta) announced
Big support for Visual Studio. That is where I spend my entire life during my day job. C# would be nice.
View ArticleJust Started: Using two of a Component(SD,USB)
Hello Galileo Community ! I just started and I have been going through some code for starting and I notice alot of items are called such like SD.DoSomething or Serial.Read .... What if I have 4...
View ArticleClik here to view.
max temperature for i3 cpu
hi!Bunch of computers at work is running a bit jumpy. (we only just received them a week earlier we had them built)it runs an i3 4160 haswell. So we ran some stress test + monitoring to see if there...
View ArticleRe: /dev/root out of space
jblackston, there are some other discussions of this problem on this forum. Basically, your /var/log/journal folder is getting filled up. Fix with rm -rf /var/log/journal/* For...
View ArticleRe: Blink example is misleading
actually I have the Edison Arduino board, but this problem turned out to be a Ubuntu kernel regression due to the multi-mode USB adapter. The quick fix is to use a hub with Ubuntu 14.10 and then things...
View ArticleRe: Using Arduino IDE with Edison breakout board?
Sounds great:Currently I have a variant that I have built with the pin information that matches what is in MRAA. Actually it is a good exercise as I found a bug in the MRAA table, which was fixed...
View ArticleRe: how to change MAC address without using Dediprog programmer
I have Flash+platformdata.bin file. This file was created using Board_Support_Package_Sources_for_Intel_Quark_v1.0.1. But, I have no idea. How to proceed further? Sorry if I am wrong. Can I convert...
View ArticleRe: i notice that gcc is installed, allowing native development
yes, that did the trick!
View ArticleRe: Mraa and Edison
Actually today it got a lot easier First configure your self to be able to install stuff from AlexT_Intel repos. Then to do the above, you should be able to do: opkg install gitopkg install cmake And...
View ArticleRe: Install ROS Indigo on Edison?
Not yet, I was able to get a ways, but I have not taken the time yet to figure out how to get around lots of the stuff that is not installed. Will try to take a look again once I get the Arduino stuff...
View ArticleRe: /dev/root out of space
Others can probably answer this better than me, but here is what I have run into. 1) Log files eating up all of the room. Several threads have talked about this. When I run into this I usually do...
View ArticleRe: Linux VM pre-configured for Galileo BSP building - released
AlexT_Intel wrote: [...] Currently there's only OVF format available as the most universal one, but let me know if you're interested in some other one - SUSE Studio claims to support a bunch of them....
View ArticleClik here to view.
Re: Linux VM pre-configured for Galileo BSP building - released
Thanks for creating this. I've downloaded it and may try it later. Before stumbling upon this thread, I also wanted an appropriate VM and so downloaded: Debian 7 amd64 - VMware appliance, image -...
View ArticleRe: NUC - BIOS System Time error
I am not from Intel, but I believe you are describing the Linux behavior which by default changes the CMOS RTC to store UTC time instead of local time.Either you can change your wakeup time (and...
View ArticleRe: Laptop sleep/idle issues
Hi Totallycool24, can you try to tweak the power management option found in your i218-lm network adapter on device manager. uncheck the "allow the computer the turn off this device to save power". hope...
View ArticleRe: Problems compiling libnfc on Edison (libusb)
Hi, Thanks for the suggestion. It turns out that the issue with lsusb not working was due to the fact that the Edison was not in USB OTG mode. When rebooting in USB OTG mode with a USB hub attached,...
View Articlehow to delete intel account?
Hi how to delete intel account? i want to delete my account
View Article