Re: NUC DC53427HYE won't boot USB UEFI drive
Too bad we could not try it, but at least you got it to work. Thanks for sharing the information with us
View ArticleRe: My Intel Edison project
1. I'd use the sysfs interfaces in Yocto - that's what Arduino calls as well. Pick your favorite programming language - some are already convenience wrapped. 2. You're probably not going to get...
View ArticleRe: My D54250WYKH does not start after BIOS update
I have the same problem!!! https://communities.intel.com/message/261396 I also tried the BIOS executable and the NUC never started again
View ArticleClik here to view.
Re: DC P3600 can't run 450000 IPOS in IOmeter
Would you please repeat your test with the Transfer Request Size set to 128 KB as in the picture below?
View ArticleClik here to view.
GPIO access from linux can crash the GEN2
I've found the hard way that using GPIO from the linux command line (or from a script, or C program) can crash the GPIO driver, requiring a complete cold reboot.This simple script should toggle the MUX...
View ArticleRe: Intel HD 4600, driver version 10.18.10.3960, Windows 8.1 64bit. The...
Thanks for joining the Graphics community. I just tested the latest video drivers on same graphics controller, I even disabled "Choose when to turn off the display" under control panel and the screen...
View ArticleRe: What is the meaning of status code A0 for board DZ77BH-55K
Thank you for your help.Acording to this article - Eb has two descriptions: 1) Calling Legacy Option ROMs and 2) Calling Video BIOS. A0 is Reserved for future use (new input console codes). I guess,...
View ArticleRe: WiDi cannot be installed
Please uninstall completely the WiDi tool you have and install this one:https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=19782 Kevin M
View ArticleRe: HD4000 driver problem about multiple display handling
Thanks for the information HGy. Would you please try using the following Graphics driver version 3945? Intel® Download Center Are you able to get video from each monitor when using single display...
View ArticleRe: WiDi and WiFi Simultaneously
Can you tell what is the channel that was used before and the one you are using now?You can try using the least crowded channel by taking a look in your WiFi environment with applications such as...
View ArticleRe: user ID issue
Hi peepo, Just to let you now, we have raised your issue to IT and we are waiting for their response. As soon as we receive some news I will post them here. Regards,Diego.
View ArticleRe: Edison w/ Breakout Board - How to Flash
Hi,Tried to flash a new Edison + minibreakout board in windows per instructions in: Flashing Edison (wired) - Windows Seems like the update seemed to work fine, but when I attempt to check the version...
View ArticleRe: 3D Model for Intel Edison Arduino Compatible & Mini Breakout Board
Thanks Diego, it'd really be a big help to much of the community.
View ArticleRe: write error: No space left on device
Alright, thanks. We'll both check it out on each of our ends, then.
View ArticleClik here to view.
Re: ERROR: Function failed: do_compile (python_numpy)
Sorry about that.I ran $bitbake image-full to build an image from BSP v1.0.0. The content of the log is as follows. DEBUG: Executing shell function do_compileRunning from numpy source...
View ArticleRe: Intel RST (Windows application) not offering to preserve data when...
It is a funny problem! Before installing 12.9, I uninstalled version 13.2 of the RST software using Windows Add/Remove programs. The uninstaller warned me that the drivers would not be removed if they...
View ArticleRe: Use an USB2AX on Galileo G2 (ttyACMx) device?
I am not quite sure yet what to try here with udev. I am not an expert with udev rules, but I do use them. For example when I use XBees with FTDI xbee adapters, I will use a rule to create a device:...
View ArticleRe: Custom kernel patch failing
Hi Matt - any progress on this front? Short of actually digging into the driver code, you could try running a different PTP suite (e.g. linuxptp or ptpd) on two Galileos and see if threw a more...
View ArticleRe: Use an USB2AX on Galileo G2 (ttyACMx) device?
again I don't know what i am doing, but for the fun of it I tried: modprobe on the Galileo and it did:root@clanton:~# modprobe cdc-acm[ 4201.452920] cdc_acm 1-1:1.0: ttyACM0: USB ACM device[...
View Article