Re: Where do I put arduino sketch on SD card?
The image I'm using is the one found here (https://software.intel.com/en-us/iot/downloads) which is the Linux image with IoTkit + LighttPD. So are you saying that if I power up my galileo, booting from...
View ArticleRe: Where do I put arduino sketch on SD card?
yes - it will save one sketch. If you put another sketch there it obviously will overwrite the former one but will keep 1 old sketch as sketch.elf.old
View ArticleStuck on acceptance of site use terms
I am trying to view a page on the intel website, however it comes up with: Intel® Developer Zone Additional TermsAcceptance of Site Use Terms...Every time I click "continue" at the bottom of the page,...
View ArticleRe: Intel HD 4000 Screen brightness problem
Hi Sowmya, The laptop is working fine now. I installed a lot of small updates from Windows Update and it seems like that did the trick. Can't believe I didn't check that option before i complained ....
View ArticleRe: NUC DN2820FYKH: WARNING: Processor thermal trip at boot
Can someone from Intel please repond on this? I have a number of these machines destined for signage applications which need to be returned if they can't be rebooted without needing someone to press...
View ArticleClik here to view.
Clevo W740SU Notebook with Intel 5200 Iris Pro @ 4k 60hz, popping, flickering...
Hello, I have the above notebook with Windows 8.1 64 bit connected to a Philips Brilliance 288p 4k screen (3840 x 2160@60 hz, displayport 1.2 mode selected in the on-screen menu of the monitor). I have...
View ArticleRe: DN2820FYKH wake from S5 with remote
By manually you mean the timer settings for S5 in the BIOS right?But that has nothing to do with remote wake up. My Problem is that i use OpenELEC on my NUC and it would be nice if i can turn on my NUC...
View ArticleRe: Galileo BSP1.0.2 build instructions
The Quark SoC BSP build guide version 1.0.2 is (a bit hidden) here: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23962&lang=enghttps://www.google.com/webhp?q=edkii+update+quark It has...
View ArticleD54250WYKH Cannot power up
Hi, my Intel NUC D54250WYKH cannot power up after pressing the blue power button. It happened after my NUC was hanged and I have to off the main power switch and restart. After I reconnected the power,...
View ArticleRe: why Intel® Quark SoC X1000 chip get hot fast once it powered?
for temperature as mentioned you can just send the output of "cat /sys/class/thermal/thermal_zone0/temp"
View ArticleReplace Android with Windows or Linux Distro
Hi, I got a tablet running on an Intel Atom Bay Trail-T Z3745 Soc. The tablet comes shipped with Android. My questions is, is it possible to replace android with Windows or a Linux Distro. How to do...
View ArticleRe: Intel 82579LM drops to 10Mbps from Gigabit, refuses to go back
I've had this exact same problem with an Intel(R) 82579LM Gigabit Network Adapter onboard my Dell OptiPlex 790 running both Windows 8 and 8.1. I've installed the recent (08/08/14) driver release...
View ArticleBlack bars on DN2820FYKH
I connected my DN2820 via an HDMI2VGA Adapter to my 4:3 Monitor running a resolution of 1280x1024 (Windows 7, 64 bit). The graphic engine of my nuc puts black bars on the left and right side, so i...
View Article"Device is not Ready" Disc management said
i cant initialize my ssd each and everytime it says the device is not ready. unknown but have the capacity on it
View ArticleClik here to view.
Re: Intel HD Graphics Driver Update Problem
can u help me toocouldn't find any update for ma pcher is ma pc specificationdell latitude E6540 Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHzManufacturerDell Inc.ModelLatitude E6540Total amount of system...
View ArticleRe: Help! If you have a 7200rpm internal drive, what are your temps?
Hi again! The RPS is WD's optimized spin up feature. 2.5-inch drives are configured to spin up using minimal power consumption. This is triggered (when the certain jumper settings are made) during spin...
View ArticleRe: Programming GPIO Ports From Linux
PengWan wrote: Are you saying that the previous steps in Linux is not working anymore and I should use DevKit to make it works?no, I am not. I am just saying that using libmraa / UPM...
View ArticleRe: PXE Boot
We also have problems with the same NUC D54250WYK with the latest BIOS update 28, does anyone have a fix for this?
View ArticleClik here to view.
Re: HowTo: connect USB camera and...
Hardware for Familiar's audio/video I/O (sound card and web cam) connected, powered, and recognized. Black box to right is a hub, to the left is a 9V battery. I'll have to see if I can power all...
View Article