No video display when f2 (enter setup) is tried NUC DN2820FYKH
I have this NUC setup for openELEC & it is working. I can enter the boot device menu at startup by pressing f10. But I am unable to make any changes to my bios as it has no video when I press F2 at...
View ArticleMaximum USB Device Count on Intel 8 Series Controllers?
I’m troubleshooting some USB scaling issues on the Intel 8 Series chipset. Please advise what is the maximum number of USB devices that can be connected to the Intel USB 3.0 xHCI controller on the 8...
View ArticleRe: D54250WYKH - WiDi disconnects immediately after connecting
I solved the problem somehow when I completely removed the graphics driver and installed the oldest one, then I installed the latest without removing the previously installed driver, now the NUC can...
View ArticleClik here to view.
Re: D54250WYKH - Flashing black screen when using right-click menu
I removed the Intel right-click menu from the registry and now everything is working and there's no more flashing screen when I use the right click. So it's a driver issue and it needs a fix, but if...
View ArticleRe: i3 540 graphics
If you would like to move this to the server forum, I do have another question. I have loaded the driver and it is working better than the generic, but is there any way to assign more RAM to the video...
View ArticleRe: D54250WYK dual monitor won't boot up
Hi DerRudi, I wonder if testing with different cables or monitors will give a different result.I had no problem booting from a DELL* U2413 connected to DP and a Viewsonic* TV connected via HDMI. I used...
View Articlei3 540 graphics and S3420GPV
I thought this CPU (i3 540 3.07GHz) had HD graphics, but when I try to upgrade the drivers, it says I have a plain generic display adapter with no HD. I am using an S3420GP intel motherboard with 4 GB...
View ArticleIt is possible to access a scketch function from root clanton image?
I'm logged as a root in a clanton image, but I need to access to a scketch function (developed in IDE), it is possible?
View ArticleRe: Trying to update BIOS DZ77GA-70K
Thanks for your help Scott...I'll let you know how it goes.John
View ArticleRe: mPCIe on NUC D34010WYB
Lois, i have not received any BIOS update.... please send to support@irsavideo.com. Thanks. Tom
View ArticleRe: mPCIe on NUC D34010WYB
Hi Tom, That's very odd - I emailed it to that address on May 29. Just sent it again, so let me know if it does not arrive shortly. Lois
View ArticleRe: Issue installing window 8.1 into D34010WYKH
Sylvia_intel, Thank you for your feedback. I have tried lowering the resolution of my Dell monitor s2309w to 1024x768 and to the highest resolution of 2048x1152 both at 60Hz, below is the message I...
View ArticleClik here to view.
Re: mPCIe on NUC D34010WYB
Hi Tom, I just got this auto-reply to the email I sent you: This is to acknowledge that your request was created with the ID 409 and subject "FW: Test BIOS for NUC issue with mini PCIe card power".It...
View ArticleDH61ww motherboard restart problem
I have a dh61ww motherboard. That board hang on restart when I disable on-board LAN restart done but not start quickly. Motherboard bios is current 0120.
View ArticleRe: Trying to update BIOS DZ77GA-70K
Scott,Thanks for the help, now at BIOS 0066 though I had to do BIOS recovery each time as express BIOS always failed at the Intel ME engine.Regards
View ArticleRe: "interrupt-error: Cannot set frequency 0 min 0 max 1000" - ledsensor demo
Hi guypld Maybe you should test the pin to know if your board is working fine, or is just a problem of the code of even something else. I’d try it by using reading an analog input in Linux. Take a look...
View ArticleRe: New release of Galileo software
Hi Intel_Jesus,I'm using Linux 64bits. I installed the new IDE and I did the firmware upgrade as per Getting Started... no issues and everything went just fine (firmware upgrade succesfull). However...
View ArticleWireless keeps going as limited (intel centrino wireless-n 2230)
Hi , i bought a new hp laptop ( HP ENVY 15-j002ex Notebook PC (ENERGY STAR) ) and the intel centrino wireless-n 2230 keeps appearing as limited every few mins i cant enjoy the internet or play an...
View ArticleRe: Eyeo Festival and Amplify Us
Hello, Intel_Jesus – We used Lucite and LED strips to create the light effect. We'll update the post with video soon, thanks for the interest!Lucite:...
View Article